Mounts

Home
News
Products
      -Lynx Riflescopes
      -Lynx Binoculars
      -Lynx Mounts
      -Lightforce®
      -Nightforce®
      -Meade®
      -Kowa®
      -Silva®
      -iGen Night Vision®
      -Night Owl®
      -Streamlight®
Services
      -Adverts
      -FAQ
      -Articles
      -Downloads
      -Service Centre
      -Dealer Locator
Contact
Links

Lynx All Steel Mounts and Rings

One Piece Mounts (1P)

Span the bolt opening of a rifle, usually attaching to the bridge and receiver of the rifle with two screws each in front and back. These mounts are designed specifically to fit only one action length, be it short, medium or magnum calibres.

Two Piece Mounts (2P)

Mount individually on the bridge and receiver of a rifle with two screws at front and two at back. The same mounts can be used regardless of action length.

Side Mounts

Attach to the side of the weapon action on hand guns and some rifles.

1 Inch (25.4mm) Rings for scopes with 1-Inch maintubes. Available in three heights: Low (7mm from base to scope tube), medium (12mm) and high (17mm). Also in three finishes: Satin chrome, matt black and glossy black.

30mm Rings for scopes with 30mm maintubes. Available in three heights: Low (7mm from base to scope tube), medium (12mm) and high (17mm). Also in three finishes: Satin chrome, matt black and glossy black.

1 Inch and 30mm Ring Mounts

Fit directly on to rifles with dovetailed recievers. Available in three heights: Low (7mm from top of action to scope tube), medium (12mm) and high (17mm).

Lynx All Steel Mounts & Rings

All lynx mounts and rings are machined from steel.

Front and rear rings share recoil equally to provide the strongest most rugged mounting solution available whether you use one-piece mounts (1P) or side mounts, which span the bolt opening or two-piece mounts (2P), which mount individually on the receiver and bridge.

Extended mounts (ext), which bring the mounting rings closer together to allow short scopes to be mounted on long actions or regular scopes to be moved closer to the shooters eye, are available for some rifles.

Three ring heights for bases are available for scopes with
1-inch and 30mm maintubes.

Lynx also manufactures
ring mounts that fit directly onto the action rifles with dovetailed receivers.

Click on one of the links above to jump to the desired location in the mount listing. If you cannot find your rifle listed, please call or email us for further assistance.